Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 27 Next »

Content of this page


Class usage, manuals and howtos

Other documents

Exceptions handling

Compatibility span (Supported PHP versions)

This library should be compatible with at least PHP 5.3 up to PHP 7.2. However, running this module in older versions of PHP makes it more unreliable as PHP is continuosly developed. There are no guarantees that the module is fully functional from obsolete releases (like PHP 5.3 and most of the PHP 5.x-series is).

Requirements and dependencies

Some kind of a supported driver is needed. NetCURL was built for curl so it could be a great idea to have curl available in your system. The goal with the module is however to pick up the best available driver in your system.

Supported drivers

  • curl
  • soap (SoapClient with XML)
  • Guzzle
  • Wordpress 

Future plans for independence:

  • Streams
  • Sockets

Dependencies and installation

As netcurl is built to be independently running dependencies is not necessesary required. To reach full functionality the list below might be good to have available.

  • Installation: Composer. NetCURL can be bundled/manually downloaded, but the best practice is to install via composer. Otherwise you're a bit on your own.
  • SSL (OpenSSL): Not having SSL available means that you won't be able to speak https
  • SOAP: To make use of the SOAP components in NetCurl, XML libraries and SoapClient needs to be there. SoapClient uses Streams to fetch wsdl.

XML, CURL, SOAP

In apt-based systems, extra libraries can be installed with commands such as:


apt-get install php-curl php-xml php-soap


The module installation itself

This is the recommended way (and only officially supported) of installing the package.

1. Get composer.
2. Run composer:

composer require tornevall/tornelib-php-netcurl

Composer also adds the crypto module during the installation. API-docs can be found here, as this site is not yet updated with this.

NetCurl Parsing

  • By PHP serialized content (serialize/unserialize)
  • JSON
  • XML (Starting with SimpleXMLElements, the PEAR/PECL modules such as XmlSerializer/XMLUnserializer are also supported)
  • DOMDocument (Converts html documents into DOMDocument arrays, by three methods: nodes, closest tags and element ids)

NetCurl extra features

The name NetCurl was born from the fact that there are more than one module in this class file. A network module also resides in the single file, which is the primary reason why it is called NetCurl. NetCurl takes care of different network based features, like resolving hosts, making sure that ip-addresses is really ip-addresses, extracts proxy addresses from server variables, encodes base64-strings into URL-compatible strings, reads CIDR-formatted netmasks properly, etc, etc, etc. This part of the documentation has documentation of all those modules.

Internal drivers

DriverClassProvidesInstallationNotes

CURL

MODULE_CURL

curlCurl must be installed 
SimpleSoap

MODULE_SOAP

SoapClient
(Streams)
  

Importable drivers

NetCurl primarily supports curl, as the name reveals. However, if you run wordpress or Guzzle, there is a small driver switch in NetCurl that makes it possible to survive without curl. Below, the supported drivers are listed and what they may provide for you.

DriverClassProvidesInstallationNotes
Wordpress
WP_HTTP
curl and streamsWP must be presentOn SOAP, SoapClient makes fallback to internal class
GuzzleHttp
GuzzleHttp\Client
GuzzleHttp\Handler\StreamHandler 
curl and streams

Add to composer.json:

"guzzlehttp/guzzle": "6.3.0"

On SOAP, SoapClient makes fallback to internal class

Driver overriders

Overriding the default drivers can be done by running for example.

Say that you'd prefer to use Guzzle over CURL. First of all, this is kind of double building the network module as guzzle primarily uses CURL to run. So doing this will make you build a wrapper over a wrapper, instead of going directly through curl.

First of all, you need to get the guzzle package. This is done by adding this row into your composer.json-file (or use the composer require statement).

"guzzlehttp/guzzle": "^6.3"

When this is done, use composer install or composer update and start adding your code:

$CURL = new MODULE_CURL();
$CURL->setDriver(NETCURL_NETWORK_DRIVERS::DRIVER_GUZZLEHTTP);
// or
$CURL->setDriver(NETCURL_NETWORK_DRIVERS::DRIVER_GUZZLEHTTP_STREAM);

The best available driver could also be autodetected via the method setDriverAuto().

Library Content

NetCurl contains a bunch of classes in a single file that in the beginning was supposed to make the library independent. The namespace is TorneLIB.

ClassDescriptionAPI Document
MODULE_NETWORKHandler of any networking related actionsLink
MODULE_CURLThe magic class that does the work for you in all http-related actionsLink
MODULE_SOAPSoapClient-handlerLink

NETCURL_EXCEPTIONS

Exceptions related to the libraryLink
NETCURL_AUTH_TYPESAvailable authentication types for use with password protected sitesLink
NETCURL_POST_METHODSList of methods available in this library (Like GET, POST, PUT, DELETE)Link
NETCURL_POST_DATATYPESPrepared formatting for POST-content in this library (Also available from for example PUT)
Examples: json, xml, etc
Link
NETCURL_RESOLVERResolver methods that is available when trying to connect (ipv4/ipv6 based selectors).
This defines whether the resolver should prioritize ipv4 or ipv6 first.
Link

NETCURL_NETWORK_DRIVERS

Available http driver handlers - Internal (default), WordPress, Guzzle, etcLink
NETCURL_ENVIRONMENTUsed for testing (deprecated)Link
NETCURL_RESPONSETYPEResponsetypes (how they are returned - as arrays or objects)
Normally not used
Link

NETCURL_HTTP_OBJECT

If you need to get the responses out as objects, this is the predefined objectLink

NETCURL_IP_PROTOCOLS

Address Types class (ipv4/ipv6)
This defined wheter the connector should prioritize ipv4 or ipv6 first
Link

MODULE_NETBITS

Bitmasking handler (will probably be moved out of this library soon)Link

 

NetCurl responses (Unchained)

The list below shows the response content that are returned from a GET/POST/etc. You necessarily do not need to fetch the keys yourself; you can also use NetCurl internal methods to get each data key from the response. As of v6.0.18, NetCurl is chained by default. This means that chained (PHP 5.4+) commands can be used (like $LIB->doGet()->getParsed()). Chaining can be disabled with $LIB->setChain(false); - however, chaining is automatically disabled if PHP 5.3 or lower are detected. The table below shows how the raw data content looks "unchained".

Response keyGet methodarray content value
codegetCode()

The current HTTP Status code returned from the request (See https://en.wikipedia.org/wiki/List_of_HTTP_status_codes)

This response status code can be used to detect, for example 404 not found errors, or similar, of a page. By means, you may throw optional exceptions by checking this code state as you need.

header 

The full response header returned from the request as ...

Header array
array(
    'info' => array(),
    'full' => 'Full header as string'
);

... where info is an array with keys and values. Example:

InfoArray
array(
    "Server" => "Apache",
    "Strict-Transport-Security" => "max-age=63072000; includeSubDomains",
    "X-Frame-Options" => "SAMEORIGIN",
    "X-Powered-By" => "PHP/5.6.27"
);
bodygetBody()The full returned body of the request
parsedgetParsed()

If the body are recognized as specially formatted (json, xml, etc), the parsed array will transform into an object or an array, depending on the content.

Currently, the parser supports simpler modes like XML (SimpleXMLElement) and by this also RSS-feeds (unconfirmed), JSON and serialized data. The curl library also supports usage of the PEAR-package XML_Serializer.

  • No labels